Fotografie produktu
Foto nie je záväzná
Prednosti
- Ovládanie akcelerácieMalossi remenica podporuje prenos výkonu motora na zadné koleso, najmä v mestskom prostredí s častým zastavovaním a rozbiehaním.
- 7-vrstvový KevlarTechnológia K-Belt vytvára homogénnu štruktúru vystuženú Kevlarom. Zlepšuje odolnosť voči opotrebeniu, mechanickým namáhaniam a teplotným výkyvom.
- Navrhnuté pre mestoUrčené pre mestské skútre vystavené častým akceleráciám a náročnému cestnému používaniu. Kompatibilné najmä s Yamaha X-MAX 125 a MBK Evolis 125.
Ref : MAL00138A / 1036562
Malossi
Pohonový remeň Malossi X-K s výstužou
Odporúčaná maloobchodná cena: 82,57 €78,40 €
Kompatibilita
Over, že tento diel pasuje na tvoj motocykel
Odhad doručenia…
Prednosti
- Ovládanie akcelerácieMalossi remenica podporuje prenos výkonu motora na zadné koleso, najmä v mestskom prostredí s častým zastavovaním a rozbiehaním.
- 7-vrstvový KevlarTechnológia K-Belt vytvára homogénnu štruktúru vystuženú Kevlarom. Zlepšuje odolnosť voči opotrebeniu, mechanickým namáhaniam a teplotným výkyvom.
- Navrhnuté pre mestoUrčené pre mestské skútre vystavené častým akceleráciám a náročnému cestnému používaniu. Kompatibilné najmä s Yamaha X-MAX 125 a MBK Evolis 125.
Vlastnosti
Reinforced X-Kevlar transmission belt by Malossi
The Malossi X-Kevlar reinforced transmission belt is designed for urban scooters subjected to frequent accelerations and demanding road use.
Its Kevlar-reinforced design combines mechanical strength, grip, and thermal stability to effectively transfer engine power to the rear wheel.
Design and materials
- The K-Belt technology with 7 superimposed layers forms a homogeneous structure to better withstand transmission stresses.
- The Kevlar reinforcement enhances wear resistance and mechanical stress during intensive urban rides.
- Thermal resistance limits variations in belt behavior under sustained usage conditions.
Usage and performance
- The high grip promotes the transfer of engine power to the rear wheel during accelerations and stop-and-go traffic phases.
- The longevity-oriented design supports demanding road use with a Racing-type belt.
Installation and assembly
- The 28° angle facilitates the control of the required geometry when replacing the belt.
- The height of 9.3 mm helps verify the part's compatibility before installation.
- The width of 22 mm allows for precise control of the dimension needed for replacement.
- The length of 918 mm makes it easy to compare with the belt to be replaced before installation.
- Sold individually
- Manufacturer reference 6113059
Examples of compatible motorcycles
- YAMAHA X-MAX 125
- MBK EVOLIS 125
Complete list of compatible motorcycles available in the dedicated section below
| Vlastnosť | Hodnota |
|---|---|
| Referencia | MAL00138A / 1036562 |
| Balenie | Predávané po kusoch |
| Typ remeňa | Kevlar |
| Šírka (mm) | 22 |
22 kompatibilných modelov
- YAMAHA 125 X-MAX 125 ABS (SE64)2012 - 2013
- YAMAHA 125 X-MAX 125 ABS (SEE6)2018 - 2019
- YAMAHA 125 X-MAX 125 SPORT (SE54)2012
- YAMAHA 125 X-MAX 125 MOMODESIGN (SE68)2015
- YAMAHA 125 X-MAX 125 ABS IRON MAX (SE68)2016, 2018
- YAMAHA 125 X-MAX 125 ABS MOMODESIGN (SE64)2015
- YAMAHA 125 X-MAX 125 ABS BUSINESS (SE54)2012
- YAMAHA 125 X-MAX 125 ABS (SEC3)2017
- YAMAHA 125 X-MAX 125 ABS (SE68)2014 - 2016
- YAMAHA 125 X-MAX 125 ABS (SE54)2011 - 2012
- YAMAHA 125 X-MAX 125 (SE68)2014 - 2016
- YAMAHA 125 X-MAX 125 (SE64)2012 - 2013
- YAMAHA 125 X-MAX 125 (SE54)2010 - 2012
- YAMAHA 125 X-MAX 125 (SE32)2006 - 2009
- YAMAHA 125 X-CITY 125 (SE43)2008 - 2012
- YAMAHA 125 X-MAX 125 ABS IRON MAX (SEE6)2019
- MBK 125 CITYLINER 1252009
- MBK 125 EVOLIS 1252013 - 2016
- MBK 125 SKYCRUISER 125 SPORT2012
- MBK 125 SKYCRUISER 125 ABS2011 - 2012
- MBK 125 SKYCRUISER 1252006 - 2012
- MBK 125 EVOLIS 125 ABS2013 - 2018
