Fotografije izdelka
Slika ni pogodbena
Prednosti
- ObnovaForgirani batak Wiseco prati obnovo motorjev 250 cm³, usmerjenih na cross in terensko vožnjo. Njegova standardna kompresija ohranja konfiguracijo blizu izvirnika.
- Forgirano aluminijNjegova gosta in homogena struktura je primerna za redne obremenitve terena in za napor, ki se zahteva na cross progi.
- Cross in terenskoS premerom Ø 72,500 mm in dodatkom +0,05 mm je ta batak primeren za obnovo preobdelanega valja. Primeri: Rotax Can-Am 250 MX, SWM Trial 250.
Ref : WI00205A / 1095510002
Wiseco
Komplet za batne Wiseco forgé
Priporočena maloprodajna cena: 174,00 €156,60 €
Združljivost
Preveri, ali je ta del združljiv s tvojim motociklom
Ocenjujemo dostavo …
Prednosti
- ObnovaForgirani batak Wiseco prati obnovo motorjev 250 cm³, usmerjenih na cross in terensko vožnjo. Njegova standardna kompresija ohranja konfiguracijo blizu izvirnika.
- Forgirano aluminijNjegova gosta in homogena struktura je primerna za redne obremenitve terena in za napor, ki se zahteva na cross progi.
- Cross in terenskoS premerom Ø 72,500 mm in dodatkom +0,05 mm je ta batak primeren za obnovo preobdelanega valja. Primeri: Rotax Can-Am 250 MX, SWM Trial 250.
Značilnosti
Forged piston kit by Wiseco
This Wiseco forged aluminum piston is designed for 250 cm3 cross and off-road engines. Its standard compression maintains a configuration close to the original, while its +0.05 mm oversize supports the refurbishment of a re-bored cylinder.
Design and materials
- The forged aluminum construction forms a dense and homogeneous structure, suitable for the regular demands of off-road use.
- The forged design provides the strength required for track use in motocross.
Installation and assembly
- The diameter of Ø 72.500 mm with a +0.05 mm oversize is suitable for the refurbishment of a re-bored cylinder.
- The assembly requires checking the dimensions and compatibility of the rings, pin, and tolerances before installation.
- The piston must be paired with a cylinder prepared according to the necessary adjustments to respect the piston-cylinder clearance.
- Manufacturer reference W2373M07250
Usage and performance
- The standard compression maintains a configuration close to the original for a faithful refurbishment of the engine.
- The design intended for 250 cm3 cross engines meets the needs of off-road use.
Examples of compatible motorcycles
- ROTAX CAN AM 250 MX (1986)
- SWM TRIAL 250 (1983)
- ROTAX CAN AM 250 LC (1986)
Complete list of compatible motorcycles available in the dedicated section below
| Lastnost | Vrednost |
|---|---|
| Referenca | WI00205A / 1095510002 |
| Premer premera | Ø 72,500 mm |
| Material | Aluminij |
| Kompresija batare | Standard |
| Uporaba | Terenska vozila |
5 združljivih modelov
- ROTAX 250 250 MX1978 - 1986
- ROTAX 250 CAN AM 250 LC1984 - 1986
- ROTAX 250 250 SWM TRIAL1978 - 1983
- ROTAX 250 CAN AM 250 MX1984 - 1986
- SWM 250 TRIAL 2501978 - 1983
