VHM POWERTUBE Air intakeRef : VHM1326 / VHMAI060623

Developed for optimum air flow. When the engine is running and the temperature rises, the rubber in the airbox tends to deform. This is due to the higher temperatures as it becomes softer, resulting in an even less optimal airflow. Our intake prevents the airbox from distorting and improves torque and power.

There are 3 different intake lengths ( / MEDIUM / ) available to suit your driving style and the need for more power/torque over a certain rev range. This article number only contains the version. The version is recommended for models, with improved throttle and maximum revs. Fitting the inlet

• 1. Remove the air filter and its support.
• 2. Remove the screw from the intake sleeve that holds the original intake.
• 3. Remove the original intake and fit the VHM intake.
• 4. Push the VHM inlet firmly into the inlet sleeve, there should be no gap between the VHM inlet support and the inlet sleeve.
• 5. Secure the VHM intake with the original screw on the outside of the intake sleeve.
• 6. Fit the air filter support and air filter.

• More torque and improved power
• Optimum air flow
• Easy to assemble
• Prevents deformation of airbox rubber at high temperatures