Feuling Parts 09200006 Camshaft support plateRef : FELG00259A / 09200006

FEULING PARTS – High Flow Camshaft Support Plate (Manufacturer's Ref: 8000)

Designed to enhance lubrication in Twin Cam engines, this camshaft support plate increases oil flow and volume by realigning the cam oil passages with those of the crankcase and widening essential reservoirs and passages. Made in the United States, it provides enhanced bearing protection and improved thermal management for long sessions on the road or vintage/touring motorcycles.

• Aligns the cam oil passages with those of the crankcase for optimized oil flow.
• Pressure tested; relief valve set to open at 55–60 psi.
• Increases pump reservoirs and critical oil passages to limit bearing wear.
• Additional oil groove on the camshaft bearing for cold start protection and improved lubrication.
• Pressure feed ports at the front and rear of the bearings to prevent excessive wear.
• Bearing hardware and retaining plate included.
• Recommended pairing: used with Feuling HP+ or Race Series oil pumps to leverage potential gains (up to ~3 hp and 4 ft·lbs of torque at the rear wheel reported in combination with the Race Series).

Compatibility: intended for Twin Cam engines '99–'06 (except Dyna 2006). Note: Twin Cam '99–'06 plates have tighter bearing bore tolerances for improved fit. To be used only with Feuling oil pumps.