Manufacturer reference: DFH-0143 — Fuel and oil line DRAG SPECIALTIES designed for Vintage/Classic universes. This smooth and reinforced synthetic rubber hose offers a sleek and reliable solution to replace aging lines on café racers, bobbers, or classic motorcycles.
- Diameter: 6.3 mm (1/4") — standard size for many fuel feeds and oil circuits.
- Length: 91 cm (3') — sufficient for many configurations, to be cut according to your setup.
- Material: synthetic rubber, smooth black finish, reinforced for better mechanical strength.
- Resistance: compatible with conventional petrol and oil. Made in the USA.
- Limitation: not suitable for fuels containing more than 10% alcohol (ethanol).
Ideal for creating a clean line on an old engine or modernising a feed without changing the retro aesthetic of the machine. Easily cut, attaches with suitable clamps, and should be routed avoiding heat sources and abrasion areas. For a safe installation, check the inlet diameter of your carburettors or fittings before installation.
'%3e%3cpath%20fill='%23f1ab00'%20d='M.702%207.162l1.875%201.684%206.161-5.532L14.9%208.846l1.875-1.684L8.738-.053z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
