Malossi Vespower Ignition Cone 20 Flywheel 1,2 kg RotorRef : MAL00759A / 1147895

VESPower Ignitions

Range of complete ignitions for vintage gear Vespa.

In order to allow an easy and perfect installation, a specific version for each model has been studied.

The new ignition range features:

• Lightened flywheel (weight 1,2 kg) with moment of inertia equal to 28 Kg/cm² (see attached chart). It is made from forged with external set up for additional masses (not included into the kit).
• 12 V (90 Watt ) 4-pole stator with output for battery charging.
• Red colored plastic fan with advanced booster cooling secondary fins (optimized fan profile and distribution absorption).
• Wiring dedicated to each specific application.
• Integrated coil/control unit.
• Voltage regulator: attention - is only provided in some models.

NB:
(*) Values refer to flywheel with magnets, additional mass and 6 connecting screws.
(**) For proper fitting you have to modify the ignition wiring supplied into the kit.
(***) For versions without parking optional wiring is available art. 5515703: battery charger kit, consisting of wires and voltage regulator.

As optional you can get the additional flywheel masses, which allow to adapt the ignition to the own vehicle according to its set-up, thus further increasing the moment of inertia.
You can choose between two versions with different weight and moment of inertia:

1715715:

• Application: For ALL VESPower EXCEPT art. 5516956 art. 5517175
• Dimensions: 144x105x18
• Static weight gr. including screws: 824
• Moment of inertia Kg/cm²   : 34

1715716:

• Application: For ALL VESPower EXCEPT art. 5516956 art. 5517175
• Dimensions: 134x105x18
• Static weight gr. including screws: 420
• Moment of inertia Kg/cm²   : 19

 

Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use!

Compatible brands and models

  PIAGGIO APE 50 2T <-1989 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   PIAGGIO APE FL2 50 2T 1990->1995 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   PIAGGIO APE FL3 50 2T 1996->1999 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   PIAGGIO APE FL 50 2T 1989->1990 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   VESPA ET3 Primavera 125 2T You need to replace all the lamps (from 6 to 12 V), respecting original power expressed in Watts.   VESPA Primavera 125 2T For proper fitting you have to modify the ignition wiring supplied into the kit. - You need to replace all the lamps (from 6 to 12 V), respecting original power expressed in Watts.