Malossi Set of 20x14,5mm 14,5gr - 6 pieces Variator rollersRef : MAL00194A / 1007887

Set of 6 MALOSSI rollers 20 x 14.8 mm, weight 14.5 g (manufacturer reference 6611534.F0). These rollers are molded in CPT with a specific formula by Malossi, designed as a technical replacement for CVT variators on urban scooters. Precise wear parts, they contribute to the adjustment of the engagement moment and the responsiveness of the transmission.

• Dimensions: Ø 20 mm × width 14.8 mm
• Quantity: 6 rollers
• Unit weight: 14.5 g
• Material: CPT (specific Malossi formulation)

Operation

When rotating, the mass of the rollers generates a centrifugal force that pushes the rollers outward from the variator. The heavier the roller, the earlier the engagement occurs; the lighter it is, the higher the engine must rev before the variator changes the ratio. Therefore, the choice of weight affects the acceleration and the range of RPMs where the engine develops its power.

Usage and compatibility

Intended for transmission adjustments on urban scooters, these rollers are suitable for the following Honda models, provided that the diameter and width of the variator are checked before installation:

• HONDA NSC 110 VISION (2024)
• HONDA FORZA 125 (2020)
• HONDA PCX 125 ABS EX2 (JF64) (2017)

Replace worn rollers with an identical set to maintain the original behavior or use this weight as a starting point for fine-tuning with a preparer or qualified mechanic.