30 days returnsHelp and contacts
Ref : HEA0157 / HT-SH-V4-C
Healtech

Healtech SpeedoHealer V4 Electronic control unit

56,00 €

Compatibility

Check that this part fits your motorcycle

Estimating delivery…

How to get it

Key features

  • Consistent readingCorrect the speed display after a change of sprocket, rear sprocket or tyre size. The SpeedoHealer V4 also helps to compensate for the factory error of the speedometer.
  • Precise adjustmentThe module recalculates the sensor signal in real-time. Adjust the correction from -99.9% to +9999.9%, in increments of 0.1%, to finely tune the speedometer display.
  • Road or trackSwitch from one transmission configuration to another using memory A and B. The module requires the SpeedoHealer harness specific to your motorcycle, sold separately.

Features

SpeedoHealer V4 Electronic Unit by Healtech

The SpeedoHealer V4 is an electronic unit that corrects the signal sent by the speed sensor to the motorcycle's speedometer. It helps restore an accurate reading after modifications to the gearing or tire size, while also offering MPH to KM/H conversion and maximum speed memory.


Design and Materials

  • The epoxy-sealed unit is water and shock resistant to protect the electronics in motorcycle usage conditions.
  • The waterproof design facilitates the integration of the module on a motorcycle used in various weather conditions.

Usage and Performance

  • The electronic speed signal correction compensates for discrepancies related to changes in the sprocket, rear wheel, or tire circumference.
  • The correction range of -99.9% to +9999.9% with an accuracy of 0.1% allows for precise adjustment of the speedometer display.
  • The two memory settings A and B make it easy to switch between two gearing configurations.
  • The conversion from miles to kilometres per hour allows for the use of an imported motorcycle without changing its speedometer.
  • The Top Speed Memory function records the maximum speed and displays it on the original dashboard.

Installation and Mounting

  • The module connects to the speed sensor to intercept and recalculate the signal before it is displayed on the speedometer.
  • The Plug & Play connection of the SH series simplifies the wiring when paired with the appropriate harness.
  • The management module does not operate independently and requires a specific wiring harness for the motorcycle, which is not included.
  • The SpeedoHealer harness that matches the vehicle must be purchased separately to enable installation.
  • The included zip ties facilitate the mounting of the unit on the motorcycle.
  • The installation manual indicates the connector location to guide the installation on the vehicle.
  • The 2-year warranty accompanies the product to ensure its long-term use.
  • Product reference HT-SH-V4-C and Product reference SH-...
Informations Recommended with:

This product (Ref. HT-SH-V4-C) contains only the management module. To install it on your motorcycle, it does not work alone: you must absolutely order the specific wiring harness suitable for your model.

Don't forget to add to your basket the SpeedoHealer harness (Ref. SH-...) that corresponds exactly to your vehicle.