30 days returnsHelp and contacts
Ref : HEA0158 / HT-SH-V4-TSD
Healtech

Healtech SpeedoHealer V4 Universal Electronic control unit

69,00 €

Compatibility

Universal part

This part fits many motorcycles.

Estimating delivery…

Key features

  • Corrected readingThe SpeedoHealer V4 restores a consistent speed on the original speedometer after a change of sprocket, crown or tyre. It also limits the artificial increase in mileage.
  • Precise adjustmentThe unit recalculates the sensor signal in real time. Its correction range of -99.9% to +9999.9%, in increments of 0.1%, finely adjusts the displayed speed.
  • Targeted installationCompatible with the original dashboard, the module connects to the speed sensor via a harness specific to your motorcycle. SpeedoHealer harness to be ordered separately.

Features

SpeedoHealer V4 Electronic Unit by Healtech

The SpeedoHealer V4 is an electronic speed calibration unit that corrects the signal transmitted by the motorcycle to the speedometer. It adjusts the displayed speed after a change in gearing or tire size, while retaining the use of the original dashboard.


Design and Materials

  • The unit is epoxy-sealed to ensure waterproof protection suitable for motorcycle installation.
  • The shock-resistant design protects the module during use on the motorcycle.

Usage and Performance

  • The electronic speed signal correction restores a consistent reading on the dashboard after a change in sprocket, rear wheel, or tire.
  • The correction range of -99.9% to +9999.9% with an accuracy of 0.1% allows for precise adjustment of the displayed speed.
  • The signal adjustment also corrects the artificial increase in mileage associated with modified gearing.

Practicality and Features

  • The dual A/B memory allows for quick switching between two settings tailored for different configurations.
  • The Top Speed Memory function records the maximum speed and displays it on the original speedometer.
  • The MPH/KMH converter adjusts the speed display for imported motorcycles without replacing the speedometer.

Installation and Mounting

  • The product contains only the management module, allowing for immediate identification of the necessary component for installation.
  • A wiring harness specific to your motorcycle model is essential for the module's operation.
  • The Plug & Play connection of the SH series simplifies the connection with the appropriate harness.
  • The module connects to the speed sensor to intercept and recalculate its signal.
  • The provided zip ties facilitate the attachment of the module to the motorcycle.
  • The installation guide indicates the location of the connector on the motorcycle to assist with installation.
  • The 2-year warranty accompanies the product to secure its replacement in case of a covered issue.
  • Product reference HT-SH-V4-TSD and Product reference SH-...
Informations Recommended with:

This product (Ref. HT-SH-V4-TSD) contains only the management module. To install it on your motorcycle, it does not work alone: you must absolutely order the specific wiring harness suitable for your model.

Don't forget to add to your basket the SpeedoHealer harness (Ref. SH-...) that corresponds exactly to your vehicle.