Ariete presents the Grip Super-Fast glue for handlebar grips:

• Dries in 30 to 90 seconds
• High viscosity
  

Instructions:

• Clean and dry the handlebar, throttle tube, and inner grips.
• If the throttle tube is damaged, replace it. Cover all openings to prevent gluing the tube to the handlebar.
• Apply beads of ARIETE SUPER-FAST GLUE on the outside of the throttle tube, the left end of the handlebar, and the inner ends of the grips.
• Align the grip in the correct position and slide it on quickly.
• Clean any excess glue from the inner face of the grip collar.
• Before riding the vehicle, check that the throttle grip turns freely. Fully open the throttle by turning the grip towards you, then release it. The throttle grip should turn freely and return to its normal closed throttle position.
  

Environmental Compliance

Visit our "Environmental Compliance" page to learn about:

• the applicable instructions for this product;
• the available collection and take-back solutions;
• the drop-off points;
• the relevant recycling streams.