Denali D7 CANsmart Lighting Kit LightsRef : DENA00608A / 3071653

D7 CANsmart Lighting Kit by Denali

Complete additional lighting kit for motorcycles designed to enhance visibility on the road and during adventures. It combines two DENALI D7 LED 10W lamps, the CANsmart Gen II controller, and a mounting bracket for bars Ø21-29mm for a consistent installation. The design incorporates active thermal management and polycarbonate borders for increased resistance to shocks and weather conditions.

Design and Materials

• Impact-resistant PC borders made of polycarbonate to limit the risk of cracking and fading during frequent use.
• Heat sink and LiveActive™ system to maintain LED temperature and preserve light output during prolonged use.
• Machined aluminium brackets with black anodised finish for robust mounting and improved corrosion resistance.
• Mounting hardware provided in stainless steel to ensure a solid attachment to the vehicle's anchor points.

Usage and Performance

• 7665 raw lumens per kit to enhance forward visibility and spot obstacles from a distance.
• Announced range of up to 365m at 1 lux for long-distance lighting suitable for high-speed riding.
• Beam width of 38m for useful lateral coverage when off-roading or on winding roads.
• Power consumption of 5A allowing assessment of the load on the electrical system when connected.

Practicality and Features

• DENALI CANsmart GEN II plug-and-play controller for integration into the CAN bus of compatible motorcycles and control from the original interface.
• Four configurable circuits offering up to 10A each and 30A continuous total to drive multiple accessories simultaneously.
• Advanced functions such as high/low Sync, modulation, cancellation with turn signals, and Smart Brake to adapt the light behaviour to riding.

Advantages

• Complete kit including two DENALI D7 lamps, a CANsmart GEN II controller, and a bracket for frame and bars Ø21-29mm for a ready-to-install solution.
• Mounting brackets designed for standard plates and bars with pivoting shelves to adjust the orientation of the optics.
• Compatibility with engine guards and bars from common brands, not compatible with 32mm diameter AltRider bars.

Examples of Compatible Motorcycles

• YAMAHA TENERE 700 WORLD RAID (2024 - 700 cm3)
• YAMAHA TENERE 700 RALLY EDITION (2024 - 700 cm3)
• YAMAHA TENERE 700 EXTREME EDITION (2024 - 700 cm3)

Complete list of compatible motorcycles available in the dedicated section below