For lifting the motorcycle, or even as a very practical help during an engine removal.
Details:    Details:
With two frame trussings or other flat surface under the motorcycle (chopper, cruiser, enduro, quad, ATV, etc.) you can lift it easily using the spindle    With two frame frames or any other flat surface under the motorcycle (chopper, cruiser, enduro, quad, ATV, etc.) you can lift
Through the supplied additionally mountable rubberised retainers (black) it is usually possible if two frame trussings are present, but the engine still extends further below    Thanks to the rubberized (black) retaining devices, it is generally possible to use two structures of chassis, but the engine continues to extend lower
For engine fitting or removal, this lifting table is also very helpful with other models due to its compact size    For motor assembly and disassembly, this lift table is also very useful with other models because of its size compact

Can also be fixed on site through the holes in the brackets    Can also be fixed on site through holes in brackets
Spindle height adjustment can be made with a 21mm spanner/nut    The spindle height can be adjusted using a 21 mm wrench/nut.
A matching 21s spark plug spanner supplied    21 mm spark plug wrench supplied
The retainers (black) are adjustable in height and in widthThe height and width of the (black) retainers are adjustable
Dimensions:Dimensions:

• Dimensions:Width 45cm without spindleWidth 45 cm without spindle
• Width 45cm without spindleLength of table 15.5 cmTable length 15.5 cm
• Length of table 15.5 cmLength of foot 32 cmFoot length 32 cm
• Length of foot 32 cmHeight 9 cm up to 40.5 cmHeight 9 cm to 40.5 cm
• Height 9 cm up to 40.5 cmIncrease by retainers 6 cm to 8.5 cmIncrease from 6 cm to 8.5 cmIncrease by retainers 6 cm to 8.5 cm
  Increase by retainers 6 cm to 8.5 cm

Approval:ApprovalCE approval CE
Scope of delivery:Contents:
Lifting Table

• Lifting TableLift table
  
• Lifting Table2x mounting for rubberised retainers2x mounting for rubberized retainers
  
• 2x mounting for rubberised retainers4x rubberised retainers (2 x approx 100mm/2 x approx 50mm)4x rubberized fasteners (2 x approx. 100mm / 2 x approx. 50mm)
  
• 4x rubberised retainers (2 x approx 100mm/2 x approx 50mm)21mm spark plug spanner for operating the spindle21 mm spark plug wrench for spindle operation