The fully sealed SAE USB charger with a 3300 mA output and a 150 cm cable allows for safe and fast USB charging of any device mounted externally on the handlebars, tank, or in your saddlebag – The cable is routed where USB charging is needed!

Integrated 1A "Handshake" charging confirmation from Apple.

• The power cable (100 cm / 40″) with M6 / 1/4″ eyelets fits all terminals of motorsport batteries. – Protected by a fuse.
• Charge 1 x USB device with up to 3,300 mA of available current (or get the optional O-110 USB splitter and charge 2 devices). – The charging current adapts to the connected device for safe recharging.
• Weather-resistant USB charging port, easy to attach to the handlebars, stem, or even the brake/clutch cable – Ensures sealing against the inserted USB cable for charging in all weather!
• The built-in protection disables USB charging and prevents the LFP (LiFePO4) or AGM (Pb) battery of your parked vehicle from discharging – Resumes operation when the vehicle's engine starts.
• Monitors and displays the status of the parked vehicle's battery – Indicates with a flashing LED that the battery is "ready to start"!

Charge your phone, GPS, camera, and tablet with your weather-resistant charger on your motorcycle or up to 2 m away from the 12 V power supply.

• LENGTH: 60" / 150 cm + 20" / 50 cm O-31 battery cable
• CHARGE CONNECTOR (INPUT): O-31 battery cable with rings / M6 eyelets (1/4”) OR 2-pin SAE connector (if O-31 is disconnected).
• POWER (INPUT): 12V vehicle system with a 12V lead-acid or 12.8V lithium battery.
• CHARGE CONNECTOR (OUTPUT): 1x USB
• POWER (OUTPUT): 3300mA @5V
• OPERATION: Fully automatic
• Vehicle battery protection: In case of low input (<12.4V), the automatic shutdown protects the vehicle battery from total discharge.
• Turns on if the vehicle battery voltage rises above 13.3V.
• 2 LED battery controller.
• Short circuit protection, overheating protection, overvoltage protection. The O-31 battery cable includes an inline fuse.

OPERATION (Voltage)

• USB ON - from 13.3V to 18V – unlimited USB output, USB LED indicator on. Provides USB power when the vehicle's engine is charging the battery.
• USB 1 HOUR - from 12.4V to 13.3V - 1 hour USB output, USB LED indicator on. Switches to standby mode after 1 hour or at a voltage below 12.4V.
• STANDBY MODE - voltage monitoring, automatically turns back on if the vehicle battery voltage rises above 13.3 V.
• AGM / LFP MONITOR - the LED indicator blinks every 5 seconds if the battery charge is ≥ 50%, sufficient to start the vehicle's engine.
• LFP LED: from 13.1V to 13.3V.
• AGM LED: from 12.4V to 13.1V.
• NO LED < 12.4 V.
• DISABLED ≤ 9V

CABLE RATING: SPT-1

USAGE: -20°C/-4°F very low temperature, remains flexible at temperatures below freezing

STYLE: Fully enclosed electronic circuit with multiple LEDs, unique design of the cap and sleeve for the USB plug; use any USB cable, it is wrapped once inserted.

WARRANTY: Limited 3-year warranty.