ADAPTABLE TYPE BATTERYThis battery is not supplied with electrolyte, sold separately (Acid ref. 1215), so it must be filled. It needs to be maintained and the acid level checked (1-2 times a year).
Note: you may receive an equivalent battery from NITRO or KYOTO.
- Remove the adhesive tab just before filling.
- Fill the battery with acid using the filling kit.
- Leave the battery unplugged for 1 hour.
- Charge the unplugged battery with a motorcycle charger (such as Tecno Globe MEGA FORCE). Charging times are given in the following table:
| Power | Charging time |
| Up to 6 Ah | 1 to 2 hours |
| 8 Ah | 2 to 3 hours |
| 10 Ah | 3 to 4 hours |
| 12 Ah | 4 to 5 hours |
| From 14 to 18 Ah | 5 to 6 hours |
- Close the battery with the plug tab. These plugs (forced-fit) will ensure the battery''s watertightness. Your battery is ready to use!
INTERVIEW: Check that the acid level is always between the upper and lower limits of the battery (approx. 1-2 times a year, and during periods of extreme heat). If the acid level is too low, add ''
distilled water up to the upper level and charge the battery.If the battery is not in use, it should be charged once a month (using a Tecno Globe MEGA FORCE motorcycle battery charger).
IMPORTANT: If this first charge is not carried out (or is carried out with an unsuitable charger), the battery will lose 20% of its rated capacity and 30% of its service life. A battery that remains completely discharged for more than a month will deteriorate irreversibly.