ORIGINAL BATTERY.This battery is sold without electrolyte (Acid, part no. 1215), so it must be topped up. It MUST be maintained, and requires a check of the acid level (1 to 2 times a year).
- Remove the adhesive tab just before filling.
- Fill the battery with acid using the filling kit.
- Leave the battery unplugged for 1 hour.
- Charge the unplugged battery with a motorcycle charger (such as Tecno Globe MEGA FORCE). Charging times are given in the following table:
| Power | Charging time |
| Up to 6 Ah | 1 to 2 hours |
| 8 Ah | 2 to 3 hours |
| 10 Ah | 3 to 4 hours |
| 12 Ah | 4 to 5 hours |
| From 14 to 18 Ah | 5 to 6 hours |
- Close the battery with the plug tab. These plugs (forced-fit) will ensure the battery''s watertightness. Your battery is ready to use!
If the acid level is too low, add
distilled water up to the upper level and charge the battery.If the battery is not in use, it should be charged once a month (using a Tecno Globe MEGA FORCE motorcycle battery charger).
IMPORTANT: If this first charge is not carried out (or is carried out with an unsuitable charger), the battery will lose 20% of its rated capacity and 30% of its service life. A battery that remains completely discharged for more than a month will deteriorate irreversibly.
Dimensions (+/- 2 mm):
- Length mm: 134
- Width mm: 80
- Height mm: 160
- + terminal: Right
- Power (Ah): 12
- Voltage: 12v