RFX Universal Cable lubrication system - BlackRef : RFX0368 / 1128713

The RFX Race Series tools are a selection of high-quality tools that allow you to carry out all maintenance tasks on your off-road motorcycle. Made using only the best materials such as chrome vanadium and other high-strength steels, the RFX Race Series tools are suitable for both amateur and professional mechanics.

• Seal around the inner cable and outer sleeve.
• Suitable for a wide variety of cable sizes.
• Allows for the injection of lubricant into the cables.
• Accepts a wide variety of nozzle types.
• Once the lubricant flows freely from the other end, the cable is lubricated.

Instructions for use:

• Slide the rubber cap down and loosen the cable adjustments to release the cable.
• Dismantle the throttle housing or clutch lever mount and remove the cable.
• Remove the cable from its lower position, whether on the carburettor, throttle body, or clutch arm.
• Open the cable greaser and place it on the inner sleeve.
• Slide the outer sleeve of the cable into the cable greaser and tighten the large screw on top.
• Using a lubricant spray, insert the nozzle (use an extension if necessary) into the cable greaser and spray.
• Spray until the lubricant flows freely from the lower end of the cable.
• Reposition the cable by reversing the steps of its removal.
• Once installed, check and adjust the cable play by ensuring to turn the handlebars on each side to their maximum position.