Carpe Iter For mask mounting - Yamaha Ténéré 700 Fixing kitRef : CARP0017 / T700_BR_MM_KIT

The Carp Iter Yamaha Ténéré 700 GPS mount has two main components:

• stand(sold separately)
• a kit for attaching the bracket to the motorbike, available in two versions: attachment to the mask and attachment to the frame.
  
  

How do I know which version of the fixing kit to choose?

The type of mounting kit depends on the crash bars you have installed (or plan to install) on your motorbike.

There are generally two types of guardrails:

• One is fitted to the sub-frame of the motorbike mask (like the original Yamaha crash bars or SW-motech crash bars).
• The other is mounted directly on the motorbike frame (steering stem), like the Outback Motortek protection bars.

The Iter T700 Carp GPS support must be installed in a place that is NOT occupied by your protection bars.

So, for example, if you have the original Yamaha protection bars, opt for the frame-mounting kit.

If you have Outback Motortek protection bars, opt for the mask-mounting kit.

You don't have any protection bars? Opt for the frame-mounting kit.

The kit includes 4 M5x14 stainless steel screws for installing a device such as the Carpe Iter light mount on the GPS plate.

The GPS plate installation slots are compatible with a 30 x 38 mm hole template, in landscape or portrait orientation.

The GPS plate has 3 sets of installation slots. Choose the slot that best matches the size of the device to be installed (the device installed must not significantly obstruct the view of the motorbike's dashboard and must also be far enough away from the windscreen to prevent it hitting the device installed).

The GPS plate can accept M4 screws (for example, Garmin units and their mounts generally use M4 screws), but you must use a washer to ensure that the screw head does not slip through the slots.

Compatibility of brackets for specific guardrails:

Genuine Yamaha - Frame mounting

SW-motech - Frame mounting

HEED - Frame mounting

Outback Motortek - Mask attachment