Bardahl Puncture repair Universal Flat tyre sprayRef : BDH0122 / 4942

• Repairs and re-inflates your tyre in seconds, without the need for tools or disassembly.
• Does not damage the tyre.
• Can be used with electronic valves.
• Enables you to get back on the road immediately

• If possible, remove the object that caused the puncture.
• Deflate the tyre completely.
• Manoeuvre your vehicle to place the puncture site on the ground.
• Shake the aerosol well and in cold weather, warm it up by hand or using your cabin heater.
• Screw the connector on completely without forcing.
• With the aerosol upright, spray until the product is used up.
• When the tyre is re-inflated, quickly unscrew the fitting and drive for 6 to 8 km without exceeding 50 km/h to distribute the product evenly.
• Check and top up the pressure if necessary in accordance with the manufacturer's recommendations.
• Treat this repair as temporary.
• Have your tire checked or repaired by a specialist as soon as possible.

Dangerous, observe safety precautions

Signal word (CLP):

• Danger

Hazard statements (CLP):

• H222 - Extremely flammable aerosol.
• H229 - Pressurized container: may burst if heated

Safety advice (CLP):

• P101 - If a doctor is consulted, keep the container or label available.
• P102 - Keep out of the reach of children.
• P301+P310 - IF SWALLOWED: Call a POISON CENTER or doctor immediately.
• P501 - Dispose of contents/container in a hazardous or special waste collection centre.
• P210 - Keep away from heat, hot surfaces, sparks, naked flames and all other sources of ignition. No smoking.
• P211 - Do not spray on a naked flame or any other ignition source.
• P251 - Do not puncture or burn, even after use.
• P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C, 122°F

Additional sentences:

• Do not use for any purpose other than that for which it is intended.