The "wheel splash" plate holder adds a futuristic touch.
The ultra-reinforced attachment is 5mm thick steel, strengthened by folds to stiffen the entire plate holder against vibrations. It is mounted on the axle of the swingarm wheel.
The holder is made of 1.5mm thick steel. It has been curved to fit your tyre, preventing splashes on both the passenger and the rider.
The location allows for the registration plate as well as the indicators and approved L.E.D lighting.
The entire plate holder is coated with high-quality matte black epoxy paint, resistant to weather and stone impacts.
A black plug, designed to fit the shape of your wheel arch hole (location of the original plate holder) is provided. This prevents water infiltration.
The pack includes:

• 1 Wheel splash plate holder.
• 1 reinforced steel attachment 5mm thick.
• 1 aluminium arm 5mm thick.
• 1 approved L.E.D lighting.
• 12 heat-shrink connectors to crimp (pliers) for connecting the L.E.D lighting, your indicators, and brake light.
• 8 FHC M6x20mm screws + 7 M6 nuts + 7 Ø 6mm washers.
• 8 black nut covers (to be used on the wheel edge and the swingarm attachment once the two parts are joined.)
• 8 black covers for FHC countersunk screws (to be used on the wheel edge and the swingarm attachment once the two parts are joined.)
• 2 cables of different colours, each 1 metre long for connecting the L.E.D lighting.
• 4 cables of different colours, each 1 metre long for connecting the indicators.
• 1 flexible black sheath of 1 metre for routing the electrical cables, supplied with cable ties.
• 1 braided sheath of 1.10 metres for routing the electrical cables, supplied with cable ties.
  
• (Indicators are not included)