The "wheel-hugging" number plate holder is machined from noble and durable materials (aluminium), providing both lightness and robustness with a futuristic touch.
It has been developed to maintain the necessary functions for your vehicle.
The wheel-hugging function prevents splashes.
The option to install indicators and approved L.E.D lighting.
The ultra-reinforced mounting is made of 5 mm thick aluminium, strengthened with folds and reinforcements to stiffen the entire number plate holder against vibrations. It is placed on the axle of the swingarm wheel.
The functionality of the wheel-hugging holder is made of 3 mm thick aluminium. It has been bent to fit your tyre, preventing splashes on both the passenger and the rider.
The location allows for the installation of the registration plate as well as the indicators and approved L.E.D lighting.
The entire wheel-hugging number plate holder is coated with high-quality matte black epoxy paint, resistant to weather and stone impacts.
A black plug, designed to fit the shape of your wheel arch hole (original number plate holder location) is provided. This prevents water infiltration.
All French or foreign registration plates are adaptable to the wheel-hugging number plate holder.
The number plate holder, wheel-hugging, complies with road safety regulations, which state that the plate must be at least 30 cm from the ground. You can take the example of the Ducati Diavel, whose registration plate is originally mounted on a wheel-hugging number plate holder.

The pack includes:

• 1 "Wheel-hugging" number plate holder in aluminium
• 1 Reinforced aluminium mounting arm, 5 mm thick.
• 1 plug. (The plug is to be used to seal the hole of the original number plate holder; you have the option to change the rear optics to install the Lucas stop light).
• 1 Approved L.E.D lighting.
• 12 Heat-shrink connectors to crimp (pliers) for connecting the L.E.D lighting and your indicators. The connection of the connectors is made on the main wiring harness and behind the arm of the wheel-hugging number plate holder. (Keep the original plugs of your indicators and number plate lighting, cut the electric wires 15 centimetres after the original connector).
• 4 FHC M6*16 mm screws + 4 nuts diameter 6 mm and 4 washers diameter 6 mm
• 4 black nut covers (to be used on the wheel-hugging holder and the swingarm mounting once the two pieces are joined together.)
• 4 black covers for FHC countersunk screws (to be used on the wheel-hugging holder and the swingarm mounting once the two pieces are joined together.)
• 2 cables of different colours, each 1 metre long for connecting the L.E.D lighting.
• 4 cables of different colours, each 1 metre long for connecting the indicators.
• 1 Braided sleeve of 1.10 metres for routing the electric cables, supplied with riselants.

(Indicators are not included)