Denali CANsmart™ Kit D3 Foglight LightsRef : DENA00181A / 3064547

DENALI CANsmartâ„¢ Kit D3 consisting of:

• DENALI CANsmart 2.0 Plug-n-Play Controller (1x)
• DENALI D3 LED Fog Light (2x)

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing street-legal fog light to hit the market. Our proprietary fog optics were painstakingly engineered to reach the maximum allowable candela (beam distance) for each of the regulated lighting zones for both the North American SAE/DOT and European Union ECE regulations! The result is a truly unique lens that performs as well as it looks, capable of generating a super-crisp fog beam that is 450 feet long by 350 feet wide at 1 lux (per pair)! No other street-legal fog light even comes close! 

Our D3 is also available in our signature TriOpticâ„¢ beam system that provides a spot and hybrid beam option (in the same kit) for drivers wanting uncompromised light output when you need it most. 

Features

• Best in class street-legal fog beam (SAE/DOT & ECE certified) 
• High-Intensity Series Cree LEDs outputting 2800 lumens per pod 
• DataDimâ„¢ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers) 
• DrySealâ„¢ Submersible Waterproof light can withstand the most extreme environments 
• Impact PCâ„¢ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. 
• LiveActiveâ„¢ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Amber & selective yellow lenses available (sold separately) 

Beam Performance (pair) 

• Beam Distance (at 1 lux): 450 feet (137 meters) 
• Beam Width (at 1 lux): 300 feet (91 meters) 

Specs (single pod)  

• Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep
• LED: (4x) 11 Watt Cree XP-P LEDs 
• Power Draw: 40 Watts (3.3 Amps)
• Lumens: 2800
• DataDimâ„¢ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Fog Lens Certifications: SAE/DOT J583 & ECE R19 

What’s in the Box?

• (1x) D3 LED Fog Light Pod 
• (1x) Hinge Mounts with M8 Stainless Steel Hardware 
• (1x) Wiring Pigtail

Harness the flexibility and intelligence of your motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmartâ„¢ Controller GEN II. The DENALI CANsmartâ„¢ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the CANsmartâ„¢ Accessory Manager Software. 

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and the B6 auxiliary brake light.  

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.

Features    

• High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
• Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
• Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during road side emergency's. 
• Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBombâ„¢ without having to add an additional harness or relay.
• Strobe with Horn - With this feature selected the CANsmartâ„¢ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBombâ„¢ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmartâ„¢ reads vehicle speed in real time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
• Flash Pattern Braking - The CANsmartâ„¢ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
• Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions.
• Switched Power Source - The CANsmartâ„¢ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
• On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.