Denali D7 CANsmart Lighting Kit LightsRef : DENA00545A / 3071645

D7 CANsmart Lighting Kit by Denali

A complete lighting kit featuring two 10W D7 LED lamps, the GEN II CANsmart controller, and a mounting bracket for tubes Ø21-29 mm. The lamps deliver 7665 lumens per kit with a beam capable of reaching 365 m at 1 lux, while the controller offers command and modulation options suitable for motorcycles equipped with a CAN bus. The anodised aluminium bracket allows for a robust mounting on most crash bars.

Design and Materials

• High-intensity Cree LED series providing 7665 lumens per kit for long-range visibility.
• Submersible DrySeal™ housings and switch, ensuring waterproofing suitable for wet and muddy conditions.
• Impact-resistant polycarbonate Impact PC™ edges that withstand shocks and corrosion to maintain optical integrity over time.
• Heat sink and LiveActive™ management to maintain luminous performance during prolonged use.

Practicality and Features

• DENALI CANsmart GEN II plug-and-play controller for direct integration on compatible CAN bus motorcycles, simplifying installation.
• Four configurable circuits, each delivering up to 10 A continuously and 30 A max for the entire system, to power multiple accessories.
• ON/OFF and dimming controls from the original controls to adjust intensity according to day/night without adding switches.
• Practical functions (deactivation with turn signal, modulation, headlight flash, Smart Brake) to enhance lighting management in traffic.

Usage and Performance

• Beam distance of 365 m at 1 lux to spot obstacles and landmarks from afar.
• Beam width of 38 m providing useful lateral coverage when riding on winding roads.
• Power consumption rated at 5 Amps, a figure to consider for the vehicle's electrical sizing.
• Compatible with DataDim™ to allow intensity variation via compatible interfaces.

Highlights

• Mounting bracket for tubes Ø21-29 mm made from machined aluminium with a black anodised finish for a solid and durable hold.
• Kit includes (2) mounting clamps, (2) pivoting shelves, assembly hardware, and installation instructions to facilitate mounting.
• Bracket compatible with many OEM and aftermarket crash bars (SW-MOTECH, R&G, Givi, Kappa, Hepco-Becker, Krauser, Touratech, and BMW).
• Note: not usable on AltRider crash bars with a 32mm diameter tube; compatible with 25mm AltRider bars.

Examples of Compatible Motorcycles

• KTM 1290 SUPER ADVENTURE S (2020 - 1290 cm3)
• KTM 1290 SUPER ADVENTURE R (2020 - 1290 cm3)
• KTM 1290 SUPER ADVENTURE R TKC (2019 - 1290 cm3)

Complete list of compatible motorcycles available in the dedicated section below